Curtain motor controller
Curtain motor controller

Mains voltage control unit which is used to control curtain motors.

Installation instructions

Mount Kelvin Curtain motor controller

  • N - Terminal for Neutral
  • L - Terminal for Line S1
  • I1 - Input terminal 1
  • I2 - Input terminal 2
  • Open output terminal
  • Close output terminal

Warning

During the installation of the product, the supply voltage MUST BE DISCONNECTED.

Please directly disconnect it from the breaker box to avoid any risk of electrocution. Installation must be conducted by a certified professional.

The module must be installed and connected following the diagram(s) presented in this user guide. Mount Kelvin will not be responsible for any loss or damage resulting from a none respect of the instructions of this user guide.

Specifications

Property Value
Power supply : 230 V AC ~ 50 Hz
Switching capabilities: 230V AC – 3A
Maximum engine power: 280W Max – 60 Nm Max
Consumption: <1W
Radio frequency range:  2.4 GHz
Operational temperature: -10°C to 40°C
Protection rating: IP 30
Dimensions: 40 * 45 * 16,9 mm

Certifications and standards

Standard
RED DIRECTIVE 2014/53/EU
EN 300 328 v2.1.1
EN 301 489 v2.2.0
EN 301 489 v3.2.0
EN 60669-1 : 1999+A1 :02+ A2 :08
EN 60669-2-1 :2004+A1 :09+A12 :10
EN 62479 :2010